Hornet construction
Glueing the wing assembly
Step 1) Using a stanley knife cut along the lines shown on the wing assembly. DO NOT CUT THROUGH THE BALSA WOOD. Fold the wings up at an angle of 30 degrees.
Using a stenalye knife score the wing assembly along the line shown.
step 2) Place glue on the wing assembly as shown on the right.
Place glue on the wing assembly as shown
Step 3) Glue the wing assembly onto the fuselage as shown. Line up the fueslage and wing assembly according to the lines on the pattern. Line up the fuselage according to the lines on the wing assembly. Line up the fuselage according to the lines on the wing assembly.
Continue